Subject to optical and technical changes without notice; No liability assumed for setting and printing errors.
ekey TOCA Solution - F1.doc
Call (941) 782-1227 or visit www.ekeyUSA.com
Page
18
4.6 Fingerprint Scanner with LED for Status Indication
The fingerprint scanner can be fitted with a ring or cover that includes three different colored LEDs
(yellow, green, & red). These LEDs can be used to give the end-user visual indication that reflects the
status of the system that is being controlled by ekey. In a typical installation, these LEDs can be used to
indicate to the end-user whether the alarm security system is not-secured, ready-to-arm, or armed as
explained in the following example.
Yellow light – when the yellow light is turned ON, it indicates that that the security system is not
ready to be armed. This means one or more motion sensor, door contact, or any defined zone in
the security system is not secured. The idea here is to indicate to the end-user that while the
yellow light is on the security system will not arm even if he/she swiped his/her designed finger
for arming the security system.
Green Light – when the green light is turned ON, it indicates that the security system is ready to
be armed. Meaning all monition detectors, door contacts, and zones are secured. The idea here
is to indicate to the end-user that while the green light is on the security system will arm if
he/she swiped his/her designed finger for arming the security system.
Red Light – when the red light is turned ON, it indicates that the security system is armed. The
idea here is to indicate to the end-user that while the red light is on the security system will
disarm if he/she swiped his/her designed finger for arming the security system.
The LEDs are standard 12volts colored lights (yellow, green, & red) positioned around the ekey
fingerprint scanner but they are not powered or controlled by the ekey system; however, these light
shows the status of a system integrated with ekey. The LEDs It comes in two options black plastic (Part
number 100426) stainless steel (part number 100428). Both options are not secured by any screws are
installed by aligning and snapping it over the fingerprint scanner. They can be removed by pushing on
the scanner while pulling the bottom edge away from the wall.
Round Cover with LED
stainless steel
(part number 100428)
Round Ring with LED
Plastic
(part number 100426)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais